2026-11-19
The gap between a drawing and a shippable plastic part is usually filled with unanswered questions. Who owns the mould? Who inspects the first samples? Who packs the carton, and to whose artwork? Running tooling, moulding and export packing inside one facility removes most of those questions, and it changes what you need to prepare before you ask for a price.
A project starts with either a drawing or a physical sample, and the review that follows is the step buyers underestimate. Wall thickness, draft angle and gate position get checked against what the part has to do in service. Those three decisions drive tooling cost and the moulding cycle together. A part that ignores them can still be produced. It will simply be produced slowly, with more scrap and a longer approval loop.
| Stage | You supply | We return |
|---|---|---|
| Drawing review | A 2D/3D file or a physical sample | A manufacturability read on wall thickness, draft and gating |
| Tooling | Approved geometry and a material call-out | A multi-cavity mould built in-house |
| Sampling | Feedback on the trial parts | Pre-production samples for approval |
| Production | Nothing further, or a revised requirement | A moulded batch with dimensional checks |
| Packing | Your packaging artwork | Printed bags or export cartons, palletised |
Custom does not have to mean a million pieces.
Our customization listings start a moulded part from 10,000 pieces, and mixed-SKU container plans let a distributor launch a range rather than commit to full-container volumes for every variant. Colour matching and printed packaging can ride on the same order, which matters when the parts will be sold under your brand rather than ours.
Bulk orders can be accompanied by raw-material lot, production date and inspection records for the delivered batch, so the quality claims you pass to your own customers trace back to a manufacturing record. Where a market demands formal certification, what we hold is ISO 9001:2015, certified in 2019, together with REACH documentation, and both are published on our quality control page. If your market needs a certificate we do not hold, that conversation belongs before tooling rather than after.
We are a plastic moulding operation. Our own range covers anchors, washers, spacers, plugs and cap nails, with metal fixings supplied alongside them. If your part is entirely metal with no moulded content, we are the wrong supplier and you should hear that before you send a drawing. We also do not quote a firm mould price from a sketch. Anyone who hands you an exact tooling figure before seeing draft, wall thickness and cavitation is quoting a number that will move.
What is the minimum order for a custom part?
Our listings start a custom moulded part from 10,000 pieces. Treat that as a starting point rather than a rule, because the real figure follows cavitation, part size and material.
Can you work from a physical sample instead of a drawing?
Yes. A sample can be measured and converted into geometry, and the same review of draft and wall thickness still applies before tooling starts.
Can the packaging carry our brand?
Yes. Printed bags and export cartons are produced to your artwork, and customer-specific cartons can ship inside mixed-SKU container plans.
Langfang Yifang Plastic Co., Ltd moulds construction fasteners in Langfang, Hebei, and runs tooling, moulding, quality control and export packing from one 6,800 m2 facility. Customization options are listed under Custom Plastic Parts (OEM/ODM). For the fixing side of facade work, see our guide to specifying insulation anchors for ETICS/EIFS facades.
КОНТАКТ США В ЛЮБОЕ ВРЕМЯ